Monday, July 16, 2018            Toll Free 1800-1800-190
Department of Mechanical Engineering Publications

Dr. M. P. Garg

 

  • Garg, M. P., Jain A. and Bhushan, G.,  Modelling and multi objective optimization of process parameters of WEDM using non dominated sorting algorithm, Proceedings of institution of mechanical Engineers, Part B, Journal of engineering manufacture, Vol. 226, No. 10, pp. 1986-2001,  (2012)
  • Garg, M. P., Jain A. and Bhushan, G., Multi- objective optimization of process parameters in wire electric discharge machining of Ti 6-2-4-2 alloy”, Arabian journal of science and engineering (Springer, USA), Vol. 39, Issue 2, pp. 1465-1476, (2012)
  • Garg, M. P., Sharma, N., Gupta R.D., AWJ Circular Cutting And Advanced Parametric Optimization Using Taguchi, Grey Relational And Entropy Measurement Method”, Ciencia Tecnica, Vol. 31, No. 3, pp. 57-86, 2016
  • Garg, M. P., Sahu C.K., Kumar, A., Mathematical modeling and analysis of WEDM machining parameters of nickel-based super alloy using response surface methodology” , Sa¯dhana¯, Vol. 42, No. 6, June 2017, pp. 981–1005, 2017
  • Garg, M. P., Sharma, A., Examination of Accuracy Aspect in Machining of ZrSiO4p / 6063 Aluminium MMC using CNC Wire Electrical  Discharge Machining:, Composites Communications, 6,  pp. 6-10, 2017
  • Garg, M. P., Jain A. and Bhushan, G., “Empirical Modelling and Optimization of Process Parameters of Wire Electrical Discharge Machining in Machining of Ti 6-2-4-2 alloy”, International journal of forming technology, 2017
  • Vishal Gupta, Pandey P.N., Garg, M.P., Khanna Rajesh, 2014,Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble”, Proceedia Material Science, 6 140 – 149,  ( 2014 ) 
  • Sharma Anand, Garg, M.P. and GoyalKapil, Prediction of optimal conditions for WEDM of Al 6063/ ZrSiO4(p) MMC, Proceedia Material Science 6 ( 2014 ) 1024 – 1033, 2014.
  • Garg, M.P., Sharma, N., and Khanna, R., Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory, Journal of Industrial Engg.  International, DOI 10.1007/s40092-015-0112-z , 2015
  • Sharma Anand, Garg, M.P. and GoyalKapil, Investigation of wire electric discharge machining of Zrsio4p/Al 6063 MMC”, International Journal of Machining and Machinability of materials Inderscience Publisher, 2015
  • Garg, M. P., Jain A. and Bhushan, G., On process analysis and optimisation of wire electric discharge machining of Ti 6-2-4-2 using regression modelling and genetic algorithms”, International Journal of Machining and Machinability of materials,   17, Nos. 3/4,pp. 185-210, 2015
  • Garg, M. P., Jain A. and Bhushan, G., Investigation of the effect of process parameters on surface roughness in Wire EDM of Titanium alloy, Advanced Materials Research, Vols. 472-475, pp. 78-81, 2012 
  • Garg, M.P., Kumar, R. and Sharma, R.C., Vibration analysis of radial drilling machine structure using finite element method, Advanced Materials Research, Vols. 472-475, pp. 2717-2721, 2012
  • Garg, M.P., Saini, J.S. and Nanda, T., Finding the natural frequencies and mode shapes for vibrational analysis of upright drilling machine, Journal of Institution of engineers, Oct, 2005.
  • Garg, M. P., Gupta, V., and Khanna, R., Analysis of kerf taper angle in abrasive water jet cutting of makrana white marble, Asian Journal of Engineering and Technology, 2, No.2., pp. 35-39, 2013
  • Singh, H., Khanna, R. and Garg, M.P.,  Prediction of surface roughness and material removal rate in turning EN-8”, International journal of engineering science and metallurgy, Vol. 1, No. 1, pp. 260-266, 2011
  • Mittal, D., Garg, M.P. andKhanna, R., An investigation of the effect of process parameters on MRR in turning of pure titanium (grade -2), International journal of engineering science and technology, Vol. 3, No.8, pp. 6355-6351, 2011
  • Garg, M. P., Jain A. and Bhushan, G., An investigation into dimensional deviation induced by wire electric discharge machining of high temperature Titanium alloy, Journal of engineering and technology (Wolters Kluwer, London), Vol. 2, Issue 2, pp. 104-114, 2012
  • Garg, M. P., Singh, S. and Singh, J., Experimental investigation of mechanical properties of MIG weldments of aluminium alloy plates”, Journal of engineering and technology (Wolters Kluwer, London), Vol. 1, Issue 2, pp. 100-107, 2011
  • Hassan, K., Kumar, A. and Garg, M. P., Experimental investigation of material removal rate in CNC turning using Taguchi method, International journal of engineering research and applications, Vol.2, Issue 2, pp 1581-1590, 2012
  • Garg, M. P., Sharma, N.., and Khanna, R., Surface quality analysis after EDM Drilling  for Al 7075, IOSR Journal of Mechanical and Civil Engineering, Special issue, PP. 12-17, 2016

 

Dr. Rajesh Khanna

 

  • D. Gupta, Rajesh Khanna, M.P. Garg, AWJ Circular Cutting and Advanced Parametric Optimization Using Taguchi, Grey Relational and Entropy Measurement Method, Cinecia E Technica, 31 (3), 57-86, 2016
  • Neeraj Sharma, Rajesh Khanna, Rahul Dev Gupta, Renu Sharma ,Modeling and multiresponse optimization on WEDM for HSLA by RSM, Int J Adv Manuf Technol 67:2269–2281,2013
  • Rajesh Khanna & Hari Singh, Comparison of optimized settings for cryogenic-treated and normal D-3 steel on WEDM using grey relational theory, Proc IMechE Part L: J Materials: Design and Applications IMechE 1-14,DOI: 10.1177/1464420714565432, 2014
  • Kamal K Jangra, Neeraj Sharma, Rajesh Khanna and Deepak Matta, An experimental investigation and optimization of friction stir welding process for AA6082 T6 (cryogenic treated and untreated) using an integrated approach of Taguchi, grey relational analysis and entropy method, Proc IMechE Part L: J Materials: Design and Applications 2016, 230(2) 454–469 IMechE 2015
  • Vinod Kumar, Neeraj Sharma, Kamal Kumar, and Rajesh Khanna, Surface modification of WC-Co alloy using Al and Si powder through WEDM: A thermal erosion process, Particulate Science And Technology, Taylor & Francis, doi: 10.1080/02726351.2017.1317308, 2017
  • Neeraj Sharma, Rajesh Khanna, Gurpreet Singh & Vinod Kumar ,Fabrication of 6061 Aluminium Alloy Reinforced with Si3n4/N-Gr and Its Wear Performance Optimization Using Integrated RSM-GA, Particulate Science and Technology An International Journal
  • Rajesh Khanna and Hari Singh, Performance analysis for D-3 material using response surface methodology on WEDM, Int. J. Machining and Machinability of Materials, Inderscience 14(1)45-65, 2013    
  • Neeraj Sharma, Rajesh Khanna, Rahul Dev Gupta, WEDM process variables investigation for HSLA by Response Surface methodology and Genetic Algorithm, , Engineering Science and Technology, an International Journal,Elsevier18,171-175,2015
  • Rajesh Khanna• Anish Kumar • Mohinder Pal Garg• Ajit Singh • Neeraj Sharma ,Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory, J Ind Eng Int, Springer: DOI 10.1007/s40092-015-0112-z
  • Neeraj Sharma, Rajesh Khanna, Rahul dev Gupta, Multi Quality Characteristics Of WEDM Process Parameters With RSM Procedia Engineering 64,  710 – 719,2013
  • Hari Singh, Rajesh Khanna,Parametric Optimization of Cryogenic-Treated D-3 for Cutting Rate in Wire Electrical Discharge Machining, Journal of Engineering and Technology 1(2)59-64 ,2011
  • Pardeep Gupta, Rajesh Khanna, Rahul Dev Gupta, Neeraj Sharma, Effect of Process Parameters on Kerf Width in WEDM for HSLA Using Response Surface Methodology, Journal of Engineering and Technology 9(2) 1-6, 2012.
  • Neeraj Sharma,Rajesh Khanna,R D Gupta, Pradeep Gupta, effect of process parameters on cutting rate in wedm using response surface methodology, i-manager’s Journal on Mechanical Engineering . 1 (2), 28-34, 2012
  • Hardeep Singh, Rajesh Khanna, M.P. Garg, Effect of Cutting Parameters on MRR and Surface Roughness in Turning EN-8, International Journal of Current Engineering and Technology 1(1),100-104,2011.
  • Neeraj Sharma ,Rajesh Khanna, Optimization of process parameters of cryogenic treated D-3 in WEDM by Taguchi approach, International Journal of Engineering Research and Applications1(3) 546-553,
  • Vishal Gupta, P.M. Pandey, Mohinder Pal Garg, Rajesh Khanna , N.K.Batra, Minimization of kerf taper angle and kerf width using Taguchi’s method in abrasive water jet machining of marble, Procedia Materials Science 6 ,140 – 149,2014

 

Dr. Ramandeep Singh

 

  • Ramandeep Singh, Navdeep Singh, “Micron Range Complex Structure in Microelectrochemical Machining- A Review”. International Journal of Research in Engineering and Technology, Vol. 05, Issue 08, August-2016, pp 207-217 (eISSN: 2319-1163 | pISSN: 2321-7308; Impact Factor: 935)
  • Ramandeep Singh, R.S. Walia, N.M. Suri, “Parametric Optimization of Centrifugal-Magnetic Force Assisted Abrasive Flow Machining Process Using Utility Concept”. International Journal of Research in Engineering and Technology, Vol. 04, Issue 08, August-2015, pp 382-388 (eISSN: 2319-1163 | pISSN: 2321-7308, Impact Factor: 935)
  • Ramandeep Singh, Nikhil Gandotra, Ayyappan Solaiyappan, “Study of Different Work Materials Effect on Surface Roughness in Electrochemical Machining Process”. International Journal of Research in Engineering and Technology, Vol. 04, Issue 07, July-2015, pp 505-513 (eISSN: 2319-1163 | pISSN: 2321-7308, Impact Factor: 935)
  • Harkirat Singh, Ramandeep Singh and Harpreet Singh, “Study the Influence of Weld Parameters of Resistance Spot Welding on Tensile Shear Strength of ASS 304". International Journal of Applied Science & Technology Research Excellence, Vol. 5, Issue 3, May- June 2015, pp 1-6. (ISSN NO. 2250-2718(Print), 2250-2726(Online), Impact Factor: 2.47)
  • Manpreet Singh, Harvinder Lal, Ramandeep Singh, “Recent Developments in Wire EDM: A Review”. International Journal of Research in Mechanical Engineering & Technology (IJRMET), Vol. 3, Issue 2, May - Oct 2013, pp 150-152 (ISSN : 2249-5762 (Online) | ISSN : 2249-5770 (Print)) (Impact factor:1)
  • Karamdeep Singh, Ramandeep Singh, “Improving Rockshaft’s Strength with Low Cost Using Reverse Engineering: A Case Study”. International Journal of Research in Mechanical Engineering & Technology (IJRMET) Vol. 3, Issue 2, May - Oct 2013, pp 127-129 (ISSN : 2249-5762 (Online) | ISSN : 2249-5770 (Print))(Impact factor:1)
  • Harkirat Singh, Ramandeep Singh and Harpreet Singh, “Study the influence of weld parameters of resistance spot welding on nugget hardness of ASS 304”.International Journal of Engineering Research and Science & Technology (IJERST), 2, No. 2, May 2013, pp 143-152 (ISSN 2319-5991, Impact Factor: 1.09).
  • S. Sahota, Ramandeep Singh, Rajesh Sharma, Harpreet Singh, "Study of effect of parameters on resistance spot weld of ASS316 Material". Mechanica Confab (an International Journal), Vol. 2, no. 2, Feb-March 2013, pp 67-78. (ISSN: 2320-2491)
  • Ramandeep Singh, “A Review of Reverse Engineering Theories and Tools”. International Journal of Engineering and Science Invention(IJESI), Vol 2, issue 1, Jan 2013, pp 35-38 (ISSN:2319-6734 (Online) | ISSN:2319-6726(Print)) (Impact factor:1.786)
  • Ripu Daman Sharma, Ramandeep Singh, Manpreet Singh, “Study of Electro-Chemical Machining Process for Drilling Hole”. International Journal of Engineering Research and Technology (IJERT), Vol. 1, Issue 10, December – 2012, pp 1-5. (ISSN: 2278-0181, Impact factor:1.72)
  • Ramandeep Singh, R.S. Walia, N.M. Suri, “Centrifugal Force Assisted Abrasive Flow Machining Process Parameter Study on Material Removal”. International Journal of Surface Engineering & Materials Technology, Vol. 2, No. 2 July-December 2012, pp 34-38 (ISSN: 2249-7250).
  • Ramandeep Singh, R.S. Walia, “Hybrid Magnetic Force Assistant Abrasive Flow Machining Process Study for Optimal Material Removal” in the special issue of International Journal of Applied Engineering Research, Vol. 7, Number 11, pp 2121-2124 (ISSN 0973-4562). (Through International Conference on Emerging Trends in Engineering and Technology (IETET-2012) held on 9th-11th November 2012 organized by Geeta Institute of Engineering and Technology, Kanipla, Kurukshetra, India)
  • Ramandeep Singh, R.S. Walia, N.M. Suri, “Study of Parametric Effect on Surface Roughness Improvement for Hybrid Centrifugal Force Assisted Abrasive Flow Machining Process”. International Journal of Latest Research in Science and Technology, 1, Issue 3, September - October 2012, pp 198-201. (ISSN: 2278-5299, Impact factor:1.979)
  • Ramandeep Singh, R.S. Walia, “Study the Effects of Centrifugal Force on Abrasive Flow Machining Process”. International Journal of Research in Mechanical Engineering and Technology, Vol. 2, Issue 1, April 2012, pp 34-39. (ISSN:2249-5762 (Online)| ISSN:2249-5770(Print)) (Impact factor:1)
  • Ramandeep Singh, R.S. Walia, N.M. Suri, “Study of Parameters for Magnetic Force Assisted Abrasive Flow Machining Process” in Journal of Engineering & Technology Education, Vol. 7, No. 2, July-Dec 2013, pp 44-48. (ISSN:2229-631X)

 

Vipan Bansal

 

  • Bansal, B. Goyal, Natural Gray Scale Images Contrast Enhancement Using Histogram Equalization Technique. International Journal of Computing and Corporate Research, 1(1), 2011.
  • Bansal, B. Goyal, A Comparative study of Cellular Service Provider Operating in the Sport City of Punjab, Jalandhar. International Journal of Research in Commerce and Management, 1(5), pp 102-110.
  • Goyal, V. Bansal,Contrast Enhancement of Natural Images Using Histogram Equalization Technique. CiiT International Journal of Digital Image Processing, 3 (15), 2011.
  • Bansal, H. Singh and R. Bhatia, A Comparative study of Cellular Service Provider Operating in Bathinda. International Journal of Computing and Corporate Research, 1 (3), 2011.
  • Bansal, V. Bansal,A Research Paper on Determinants of Corporate Liquidity in India, International Journals of Marketing and Technology, 2 (4), pp 104-117, 2012.
  • Bansal, J. Singh, V. Bansal, G. Kaur, Comparison of Various Edge Detection Techniques, Journal of Information and Operation Management, 3 (1), 2012. 
  • Bansal, R. Bhatia,A Study on Choice Criteria of Mobile Phone Service Users Operating in Mohali, MAIMT- Journal of IT and Management, 5 (2), 2012.
  • Bansal, B. Bansal, A Study on Customer Satisfaction of Mobile Phone Service User Operating in the Malwa Region of Punjab, ABAC Journal Assumption University Thailand, 33 (3), 30-40, 2013.
  • Sharma, V. Bansal, N. Chabbra, Effect of Cutting Parameter on Hard Turning by Using Different Lubricating Conditions: A Review, International Journal of Engineering Trends and Technology, 30 (2), 75-82, 2015.
  • Chabbra, V. Bansal,A Review of Effect of Shielding Gases Mixture on Welded Joint Properties of Low Carbon Steel in Mig/Mag Welding Process, International Journal of Scientific Research, 5 (1), 34-36, 2016.

  

Dr. Sharanjit Singh

 

  • Singh, V. S. Sharma, A. Sachdeva, Progress in selective laser sintering using metallic powders: a review, Materials Science and Technology, 32 (8), 760-772, 2016.
  • S. Sharma, S. Singh, A. Sachdeva, P Kumar, Influence of sintering parameters on dynamic mechanical properties of selective laser sintered parts, International Journal of Material Forming, 8(1), 157-166, 2015.
  • Sachdeva, S. Singh, V.S. Sharma, Investigating surface roughness of parts produced by SLS process, The International Journal of Advanced Manufacturing Technology, 64(9), 1505-1516, 2013.
  • Singh, V.S. Sharma, A. Sachdevaa, S.K. Sinha, Optimization and Analysis of Mechanical Properties for Selective Laser Sintered Polyamide Parts, Materials and Manufacturing Processes, 28(2), 163-172, 2013.
  • Singh, V.S. Sharma, A. Sachdeva, Optimization and Analysis of Shrinkage in Selective Laser Sintered Polyamide Parts, Materials and Manufacturing Processes 27(6), 707-714, 2012.
  • K. Garg, K.K. Singh, A. Sachdeva, V.S. Sharma, K. Ojha, S. Singh, Review of research work in sinking EDM and WEDM on metal matrix composite materials, The International Journal of Advanced Manufacturing Technology, 50(5-8), 611-624, 2010.

Harish Garg

 

  • Harish Garg, KetanVerma, ‘Underwater Welding-Recent Trends, Applications and Future Scope’. International journal of Emerging Technologies
  • Harish K.Garg, KetanVerma, ‘Step towards the Development of Lunar Liquid Mirror Telescope’. International journal of Emerging Technologies.
  • Harish K.Garga, KetanVermaa, AlakeshMannab, Rajesh Kumarc, ‘ Hybrid Metal Matrix Composites and Further Improvement In Their Machinability- A REVIEW’ International journal of research in science and technology.
  • JatinderKaur, Harish Garg “Image Analysis through Facial recognition: Guidelines” International Journal of Advanced Research in Computer and Communication Engineering Vol. 2, Issue 12, December 2013
  • Manbir Singh, GauravDhuria and Harish Garg “Multi Response Optimization of Parameters in Electric Discharge Machining of Al/SiC-Graphite Hybrid Composite using Grey Relational Analysis” International Journal for Science and Emerging Technologies with Latest Trends” 20(1), pp 29- 35, 2015.
  • Kuldeep Singh and Harish Kumar Garg “Comparison of Tool Material Performance on HYBRID Material for surface Roughness” International Journal on Emerging Technologies 6(2), pp 139-144, 2015.
  • Umesh K. Garg and Harish K. Garg “Optimization of Process Parameters for Metal Ion Remediation using Agricultural Waste materials” International Journal of Theoretical & Applied Sciences, 8(1),pp 12-19, 2016.

 

Nischal Chhabra

 

  • NischalChhabra, VipanBansal, A Review of Effect of Shielding Gases Mixture on Welded Joint Properties of Low Carbon Steel in MIG/MAG Welding Process, International Journal of Scientific Research, 05(1), pp. 34-36, 2015.
  • Rishi Sharma, VipanBansal, NischalChhabra, Effect of Cutting Parameters on Hard Turning by Using Different Lubricating Conditions: A Review, International Journal of Engineering Trends & Technology, 30 (02), 2015.
  • NischalChhabra, Nirmal S. Kalsi, Dilbag Singh, Effect of Shielding Gases on Micro Hardness of FE 410 (AISI 1024) Steel Welded Joint in GMAW Process, International Journal on Emerging Technologies, 5(1), pp 8-13, 2014.

  

 

Gurdeep Singh

 

  • Brar and G. Singh, FEA of Residual Stresses in Butt Welded Type Low Carbon Steel Using MMAW Technique. Mechanical and Aerospace Engineering, 110-116, 2686-2692, 2011.
  • Brar and G. Singh, A Numerical Analysis of Residual Stresses in V-Butt Weld Joint of Two Similar Aluminum Alloy Plates. International Journal of Manufacturing Science and Technology, 5(1), 22-23, 2011.

 

Hardeep Singh

 

  • Sandeep Kumar Duran, Maninder Singh, Hardeep Singh.An Experimental Investigation of Performance and Combustion Measurement for Diesel Engine.Karanja and Rapeseed Biodiesel 6(1), 2015.
  • Sandeep Kumar Duran, Maninder Singh, Hardeep Singh. Performance and combustion characteristics of single cylinder diesel engine fuelled with blend of karanja Biodiesel and Diesel. 5(7), 160-170, 2014.

 

Ved Raj Khullar

 

  • V R Khullar, Optimization of EDM Parameters by Using Minitab Software,PSATDec 14-15, 2011.
  • Ved Raj Khullar, Neeraj Sharma, Sugal Kishore, Renu Sharma, RSM- and NSGA-II-Based Multiple Performance Characteristics Optimization of EDM Parameters for AISI 5160. Arabian Journal for Science and Engineering, Volume 42, Issue 5, pp 1917–1928, 2017.

 

Sumit Nijjar

 

  • Shubham Sharma, Harish Garg, Sumit Nijjar,Techniques for the enhancement of free or natural convection using nanofluids: an overview. International Journal of Advanced Technology in Engineering and Science. Volume No.05, Issue No. 04, April 2017 (ISSN: 2348-7550)

 

Parvinder Singh

 

  • Parvinder Singh, Rajinder Singh, Experimental investigation of deposition rate in tig welding of grade 304 stainless steel, International Journal of Advanced Engineering Technology, India. Vol. V, Issue II, pp 31-33, 2014.
  • Parvinder Singh, Rajinder Singh, optimization of machining characteristic of d2 steelunder different in turning condition, International Journal of Innovative Science, Engineering & Technology, India. Vol. 1, Issue 3, 119-223, 2014.
  • Parvinder Singh, Rajinder Singh, a novel approach for hardness measurement TIGwelding of grade 304 stainless steel international journal of research inaeronautical and mechanical engineering, Vol. 2, Issue 4, pp 111-116, 2014
  • Parvinder Singh, Vikram Singh, EXPERIMENTAL INVESTIGATION OF WELD BEAD HARDNESS OF TIG WELDING OF GRADE SS316, Global Journal of Engineering Science & Researches, Vol. 1 Issue 3, 2014
  • Parvinder Singh, experimental investigation of deposition rate of tig welding of grade 316 stainless steel, International journal of engineering science & advanced technology, Vol.04, 2014
  • Parvinder Singh, Ramniwas, lean manufacturing: relevance in auto sector, Global Journal of Engineering Science & Researches, Vol. 1 Issue 3, 2014

 

BOOKS

 

Authors

Name of Book

Publisher

ISBN Number

Ramandeep Singh

CNC Machines and Automation

Eagle Prakashan (Regd.)

978-93-82369-72-1.

G.S. Aulakh & Ramandeep Singh

Machine Design & Drawing

Eagle Prakashan (Regd.)

978-93-83412-51-8

VipanBansal & BinduGoyal

Industrial Engineering & Production Management

Kaption Publishing House

81-86720-00-06

VipanBansal & BinduGoyal

Entrepreneurship Development Management

Kaption Publishing House

81-86720-01-06

VipanBansal & BinduGoyal

Basics of Management/ Engineering Management

Uneek Publishing House

NA

VipanBansal & J K Verma

Workshop Technology - III

Kaption Publishing House

81-86720-02-02

Sonia Kalra and VipanBansal

Generic Skills and Entrepreneurship Development

Eagle Prakashan

978-93-83412-64-8

 

Mission

The mission of DAV University is to contribute to society through the pursuit of education, learning, and research at the highest international levels of excellence imbibing the following core values: Freedom of thought and expression, Freedom from discrimination, Education, The encouragement of a questioning ...
Know More »

Vision

With a vision to provide excellent human resource to corporate DAV University ensures students are taught through latest teaching methodologies and technology platforms. The quality of students is the hallmark of DAV University due to which companies of global stature have recruited from DAV University.
Know More »

Contact us

  DAV University

SARMASTPUR, Jalandhar - Pathankot, National Highway (NH 44), JALANDHAR - 144 012, Punjab

  Admission Enquiry ( 0181-2708848, 0181-2372900, 070870-17551,
070870-17552, 098766-05777,
Toll Free ( 1800-1800-190 )

  Registrar Office ( +91-181-2708845 )

  registrar@davuniversity.org

  Exam Cell Helpline: 0181-2708842

  Record Cell: ar@davuniversity.org

Quick Inquiry
Copyright © 2016-17. DAV University. All Rights Reserved.